收藏本站
 
HMC1001/1002/1021/1022
 
6   ww.hone well.com
These resistive elements are aligned together to have a common sensitive axis (indicated by arrows on the pinouts) that
will provide positive voltage change with magnetic fields increasing in the sensitive direction. Because the output only is in
proportion to the one-dimensional axis (the principle of anisotropy) and its magnitude, additional sensor bridges placed at
orthogonal directions permit accurate measurement of arbitrary field direction. The combination of sensor bridges in two
and three orthogonal axis permit applications such as compassing and magnetometry. See Figure 1 for a representation
of the magneto-resistive elements.
Figure 1  Magneto-Resistive Wheatstone Bridge Elements
 
The offset strap allows for several modes of operation when a direct current is driven through it. These modes are: 1)
Subtraction (bucking) of an unwanted external magnetic field, 2) null-ing of the bridge offset voltage, 3) Closed loop field
cancellation, and 4) Auto-calibration of bridge gain.
 
The set/reset strap can be pulsed with high currents for the following benefits: 1) Enable the sensor to perform high
sensitivity measurements, 2) Flip the polarity of the bridge output voltage, and 3) Periodically used to improve linearity,
lower cross-axis effects, and temperature effects.
 
Offset Straps
 
The offset strap is a spiral of metallization that couples to the sensor elements sensitive axis. The offset strap has some
modest resistance and requires a moderate current flow for each gauss of induced field. The straps will easily handle
currents to buck or boost fields through the linear measurement range, but designers should note the extreme thermal
heating on the die when doing so.
 
With most applications, the offset strap is not utilized and can be ignored. Designers can leave one or both strap
connections (Off- and Off+) open circuited.
 
Set/Reset Straps
 
The set/reset strap is another spiral of metallization that couples to the sensor elements easy axis (perpendicular to the
sensitive axis on the sensor die). Each set/reset strap has a low resistance with a short but high required peak current for
reset or set pulses. With rare exception, the set/reset strap must be used to periodically condition the magnetic domains
of the magneto-resistive elements for best and reliable performance. A set pulse is defined as a positive pulse current
entering the S/R+ strap connection. The successful result would be the sensor aligned in a forward easy-axis direction so
that the sensor bridges polarity is a positive slope with positive fields on the sensitive axis result in positive voltages
across the bridge output connections.
 
A reset pulse is defined as a negative pulse current entering the S/R+ strap connection. The successful result would be
the sensor aligned in a reverse easy-axis direction so that sensor bridges polarity is a negative slope with positive fields
on the sensitive axis result in negative voltages across the bridge output connections.
 
Typically a reset pulse is sent first, followed by a set pulse a few milliseconds later. By shoving the magnetic domains in
completely opposite directions, any prior magnetic disturbances are likely to be completely erased by the duet of pulses.
Gnd
Permalloy Thin Film
Sensitive
Axis
Vb
Out-
Out+
Easy Axis
Gnd
Permalloy Thin Film
Sensitive
Axis
Vb
Out-
Out+
Easy Axis
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
HMC1021D IC SENSOR MAGN HI TEMP CER 8DIP
HMC1042L-TR 2-AXIS MAG SENSOR 16 PIN LCC
HMC1053 SENSOR MAGNETIC 3-AXIS 16-PLCC
HMU-PJAT1K-A20R1 CONN MU ATTENUATOR FIXED 20DB
HOA1870-033 SENSOR INFRARED
HOA1873-013 SENSOR PHOTODARLINGTON NPN SLOT
HOA1874-011 SNSR OPTO TRANS 3.05MM TRANSM
HOA1877-002 SENSOR PHOTOTRANS NPN SLOTTED
相关代理商/技术参数
HMC1002 功能描述:SENSOR LINEAR MAGN 2AXIS 20-SOIC RoHS:否 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR
HMC1002RC 制造商:HONEYWELL 功能描述:New
HMC1002-RC 制造商:Honeywell Microelectronics And Precision Sensors 功能描述:MAGNETIC SENSOR; Magnetic Field Min:-2G; Magnetic Field Max:2G; Leaded Process Compatible:Yes; Output Type:Differential; Resolution:40G; Sensitivity Range:3mV/V/G; Sensor Output:Voltage; Sensor Terminals:SMD ;RoHS Compliant: Yes
HMC1002-RC 制造商:Honeywell Sensing and Control 功能描述:MAGNETIC SENSOR OUTPUT TYPE:DIFFERENTIAL
HMC1002-TR 功能描述:SENSOR LINEAR MAGN 2AXIS 20-SOIC RoHS:是 类别:传感器，转换器 >> 磁性 - 霍尔效应，数字式开关，线性，罗盘 (IC) 系列:- 标准包装:1 系列:- 传感范围:20mT ~ 80mT 类型:旋转 电源电压:4.5 V ~ 5.5 V 电流 - 电源:15mA 电流 - 输出（最大）:- 输出类型:数字式，PWM，8.5 位串行 特点:可编程 工作温度:-40°C ~ 150°C 封装/外壳:20-SSOP（0.209"，5.30mm 宽） 供应商设备封装:20-SSOP 包装:Digi-Reel® 其它名称:AS5132-HSST-500DKR
HMC1010LP4E 制造商:Hittite Microwave Corp 功能描述:RF RMS PWR DETECTOR 3.9GHZ 24SMT
HMC1010LP4ETR 功能描述:RF Detector IC General Purpose 0Hz ~ 3.9GHz -50dBm ~ 10dBm ±1dB 24-VFQFN Exposed Pad 制造商:analog devices inc. 系列:- 包装:剪切带（CT） 零件状态:有效 频率:0Hz ~ 3.9GHz RF 类型:通用 输入范围:-50dBm ~ 10dBm 精度:±1dB 电压 - 电源:4.5 V ~ 5.5 V 电流 - 电源:50mA 封装/外壳:24-VFQFN 裸露焊盘 标准包装:1
HMC1013LP4E 制造商:Hittite Microwave Corp 功能描述:IC AMP SDLVA 67DB 24SMD